Pre-terminated harnesses
Part codes: 1T1WIA0021, 1T1WIA0022, 3Z2WIA0328, 3Z2WIA0329, 1T1WIA0005, 1T1WIA0007, 1T1WIA0010, 1T1WIA0012, 3W2PRE0013, 3Z1WIA0064
Flying-lead harnesses with the ECUMASTER connector already terminated, for building a custom installation.
Product details The EMU BLACK, EMU CLASSIC and EMU PRO versions are 3 m long with every wire labelled. Versions are also available for DET3, EDL-1, the Battery Isolator, the MAP-400 sensor and interconnector extensions.
Versions 1T1WIA0021 – Ecumaster EMU_Black - preterminated harness labeled - 3m 1T1WIA0022 – Ecumaster EMU - preterminated harness labeled - 3m 3Z2WIA0328 – Ecumaster EMU PRO-16 - preterminated harness labeled 3Z2WIA0329 – Ecumaster EMU PRO-8 - preterminated harness labeled 1T1WIA0005 – Ecumaster DET3 - preterminated harness 1T1WIA0007 – EDL-1 - preterminated harness with plug 1T1WIA0010 – Interconnector pre-terminated harness (1 m) 1T1WIA0012 – Interconnector pre-terminated harness (0.2 m) with plugs 3W2PRE0013 – Pre-terminated harness with connector (1 m) for Battery Isolator 3Z1WIA0064 – Wiring harness for Map-400
Request this product
Connector kits
Part codes: 1T2WTY0009, 1T2WTY0007, 1T2WTY0005, 1T2WTY0065
Mating connectors with terminals for EMU BLACK, EMU CLASSIC, DET3 and ADU, for harness builders.
Product details Supplied as loose housings and terminals, so the harness can be made to the exact length the car needs.
Versions 1T2WTY0009 – Ecumaster EMU_Black - connectors with terminals 1T2WTY0007 – Ecumaster EMU - connectors with terminals 1T2WTY0005 – Ecumaster DET3 - connector with terminals 1T2WTY0065 – ECUMASTER ADU - connector with terminals
Request this product
Heat-shrink boots
Part codes: 1M1KSZ0006, 1M1KSZ0002, 1M1KSZ0007, 1M1KSZ0008, 1M1KSZ0009, 1M1KSZ0010, 1M1KSZ0003, 1M1KSZ0004, 1M1KSZ0005
Straight (I) and Y-shaped heat-shrink boots in several sizes for motorsport-grade harness finishing.
Product details They seal and strain-relieve the transition between connectors, branches and the main harness sleeve.
Versions 1M1KSZ0006 – Heat Shrink I-Boot (MS-2A/I-01) 1M1KSZ0002 – Heat Shrink I-Boot (MS-2A/I-02) 1M1KSZ0007 – Heat Shrink I-Boot (MS-2A/I-03) 1M1KSZ0008 – Heat Shrink I-Boot (MS-2A/I-04) 1M1KSZ0009 – Heat Shrink I-Boot (MS-2A/I-05) 1M1KSZ0010 – Heat Shrink I-Boot (MS-2A/I-06) 1M1KSZ0003 – Heat Shrink Y-Boot (MS-3A/Y-01) 1M1KSZ0004 – Heat Shrink Y-Boot (MS-3A/Y-02) 1M1KSZ0005 – Heat Shrink Y-Boot (MS-3A/Y-03)
Request this product
Harness wire
Part codes: 1T1PRZ0162, 1T1PRZ0163, 1T1PRZ0164, 1T1PRZ0132, 1T1PRZ0062, 1T1WIA0017
FLRY thin-wall automotive wire and Raychem shielded cable for building ECU and sensor harnesses.
Product details FLRY 0.50 mm2 comes on 100 m reels. Shielded cable is used for crank, cam and knock signals that must be protected from electrical noise.
Versions 1T1PRZ0162 – FLRY wire 0.50 mm2 black (100 m reel) 1T1PRZ0163 – FLRY wire 0.50 mm2 blue (100 m reel) 1T1PRZ0164 – FLRY wire 0.50 mm2 red (100 m reel) 1T1PRZ0132 – Engine wire FLRY-B 0.75 mm2 - yellow and red 1T1PRZ0062 – RAYCHEM shielded wire (1m) 1T1WIA0017 – Raychem shielded wire for EMU PRO (2,5m)
Request this product
USB cables and adapters
Part codes: 1T1KAB0204, 1T1KAB0215, 1T1KAB0210, 1T1KAB0217
USB cables and short adapters for connecting ECUMASTER devices and the USB to CAN interface to a laptop.
Product details Includes USB A to B, USB A to A and short adapters to Micro USB and USB C.
Versions 1T1KAB0204 – USB A to USB B cable (USB to CAN) 1T1KAB0215 – USB A-A cable 1.8 m 1T1KAB0210 – Adapter USB A to Micro USB B (0.2 m) 1T1KAB0217 – Adapter USB A to USB C (0.15 m)
Request this product
Communication cables
Part codes: 3W2KAB0201, 3W2KAB0202
Ready-made cables to link ECUMASTER devices with each other or with third-party loggers.
Product details Covers the Haldex controller to DET2 link and a cable to connect Race Technology equipment to the EMU.
Versions 3W2KAB0201 – Haldex Drag Racing Controller/DET2-communication cable 3W2KAB0202 – Race-Technology cable to EMU
Request this product
Mounting brackets and sunshades
Part codes: 3Z2MOC0336, 3Z2MOC0330, 3Z2MOC0337, 3Z2MOC0331, 3Z2MOC0332, 3Z2MOC0333, 3Z2MOC0015, 3Z2MOC0335, 3Z2MOC0334, 1T2SZP0001
Brackets for ECUs, PMUs and the GDI Driver, plus sunshades and mounting hardware for ADU dashboards.
Product details Brackets give a clean, vibration-resistant installation. The sunshades improve ADU readability in direct sunlight.
Versions 3Z2MOC0336 – Mounting Bracket for EMU Black 3Z2MOC0330 – Mounting Bracket for EMU PRO 8 3Z2MOC0337 – Mounting Bracket for EMU PRO 16 3Z2MOC0331 – Mounting bracket for PMU-16 / 16DL / 24DL 3Z2MOC0332 – Mounting Bracket for PMU-16AS 3Z2MOC0333 – Mounting Bracket for GDI Driver 3Z2MOC0015 – Ecumaster EMU CLASSIC - BRACKET 3Z2MOC0335 – Sunshade for Ecumaster ADU5" Rev.2 3Z2MOC0334 – Sunshade for Ecumaster ADU7" Rev.2 1T2SZP0001 – ADU mounting set (pins and nuts)
Request this product