Adapters — 95 products from the HEL an hose and fittings range. Showing page 1 of 2.
Exclusive UAE distributor
Adapters (90)
AN10 Male to 1/2" (12.7mm) Hose Barb Adapter HEL Aluminium
HEL part number HB-10-12-AL-BLK
Adapter Type
AN Male - Barb Adapter
Barb Diameter (O.D)
12.7mm / 1/2"
AN Size (Male)
AN10, -10 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This adapter converts a push-on hose barb to an AN male thread.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN10 Male to 1/2" BSP Male Straight Adapter HEL Aluminium
HEL part number HA-MM-10-12BSP-AL-BLK
Adapter Type
AN - BSP Straight Adapter
AN Size (Male)
AN10, -10 AN
BSP Size (Male)
1/2"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN10 Male to 3/4" NPT Male Straight Adapter HEL Aluminium
HEL part number HA-MM-10-34NPT-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN10, -10 AN
NPT Size (Male)
3/4"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN10 Male to 3/8" NPT Male Straight Adapter HEL Aluminium
HEL part number HA-MM-10-38NPT-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN10, -10 AN
NPT Size (Male)
3/8"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN10 Male to 5/8" (15.9mm) Hose Barb Adapter HEL Aluminium
HEL part number HB-10-58-AL-BLK
Adapter Type
AN Male - Barb Adapter
Barb Diameter (O.D)
15.9mm / 5/8"
AN Size (Male)
AN10, -10 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This adapter converts a push-on hose barb to an AN male thread.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN3 Male to 1/8" NPT Male 90° Fixed Elbow Adapter HEL Aluminium
HEL part number HA-MM-03-18-90-AL-BLK
Adapter Type
AN - NPT Fixed Elbow Adapter
AN Size (Male)
AN03, AN3, -3 AN
NPT Size (Male)
1/8"
Angle
90°
Fixed or Swivel?
Fixed
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN3 Male to M12 x 1.00 Male Straight Adapter HEL Aluminium
HEL part number HA-MM-03-M12100-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN3, AN03, -3 AN
Metric Size (Male)
M12 x 1.00
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN4 Male to 1/8" NPT Male 90° Fixed Elbow Adapter HEL Aluminium
HEL part number HA-MM-04-18-90-AL-BLK
Adapter Type
AN - NPT Fixed Elbow Adapter
AN Size (Male)
AN04, AN4, -4 AN
NPT Size (Male)
1/8"
Angle
90°
Fixed or Swivel?
Fixed
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN4 Male to M10 x 1.5 Male Straight Adapter HEL Aluminium
HEL part number HA-MM-04-M1015-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN4, AN04, -4 AN
Metric Size (Male)
M10 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN6 Female to 3/8" Hardline Straight Adapter HEL Aluminium
HEL part number HA-H-06-38-AL-BLK
Adapter Type
AN Female - Hardline Straight Adapter/Hardline Hose End
AN Size (Female)
AN06, AN6, -6 AN
Hardline O.D Size
3/8", 9.5mm ⌀
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This AN6 female hardline hose end adapter is typically used to convert 3/8" (9.5mm) hardline into stainless steel AN braided hose for fuel, fire-suppression and water-cooling systems, giving a secure, leak-free connection in high-performance builds.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
Technical Specifications
Package Contents
Includes one straight adapter for converting AN female to hardline / hardline hose end
AN6 Female to 5/16" Hardline Straight Adapter HEL Aluminium
HEL part number HA-H-06-516-AL-BLK
Adapter Type
AN Female - Hardline Straight Adapter/Hardline Hose End
AN Size (Female)
AN06, AN6, -6 AN
Hardline O.D Size
5/16", 7.9mm ⌀
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This AN6 female hardline hose end adapter is typically used to convert 5/16" (7.9mm) hardline into stainless steel AN braided hose for fuel, fire-suppression and water-cooling systems, giving a secure, leak-free connection in high-performance builds.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
Technical Specifications
Package Contents
Includes one straight adapter for converting AN female to hardline / hardline hose end
AN6 Female to AN4 Male Straight Adapter HEL Aluminium
HEL part number HA-MF-06-04-AL-BLK
Adapter Type
AN Reducer (Female - Male), Reducing Joiner
AN Size (Female)
AN6, AN06, -6 AN
AN Size (Male)
AN4, AN04, -4 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN6 Male to 3/8" (9.5mm) Hose Barb Adapter HEL Aluminium
HEL part number HB-06-38-AL-BLK
Adapter Type
AN Male - Barb Adapter
Barb Diameter (O.D)
9.5mm / 3/8"
AN Size (Male)
AN6, AN06, -6 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This adapter converts a push-on hose barb to an AN male thread.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN6 Male to 5/16" (8mm) Hose Barb Adapter HEL Aluminium
HEL part number HB-06-516-AL-BLK
Adapter Type
AN Male - Barb Adapter
Barb Diameter (O.D)
8.0mm / 5/16"
AN Size (Male)
AN6, AN06, -6 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This adapter converts a push-on hose barb to an AN male thread.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN6 Male to AN10 ORB Male Straight Adapter HEL Aluminium
HEL part number HA-MM-06JIC-10ORB-AL-BLK
Adapter Type
ORB to AN Adapter, Joiner
ORB Size (Male)
ORB10
AN Size (Male)
AN6, AN06, -6 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN8 Male to 1/2" (12.7mm) Hose Barb Adapter HEL Aluminium
HEL part number HB-08-12-AL-BLK
Adapter Type
AN Male - Barb Adapter
Barb Diameter (O.D)
12.7mm / 1/2"
AN Size (Male)
AN8, AN08, -8 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This adapter converts a push-on hose barb to an AN male thread.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
AN8 Male to 1/2" BSP Male Straight Adapter HEL Aluminium
HEL part number HA-MM-08-12BSP-AL-BLK
Adapter Type
AN - BSP Straight Adapter
AN Size (Male)
AN08, AN8, -8
BSP Size (Male)
1/2"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Female to -8 AN Male Straight Adapter
HEL part number HA-MF-08-10-AL-BLK
Adapter Type
AN Reducer (Female - Male), Reducing Joiner
AN Size (Female)
AN10, -10
AN Size (Male)
AN08, AN8, -8
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Male to -10 AN Male Straight Adapter
HEL part number HA-MM-10-10-AL-BLK
Adapter Type
Joiner, Union
AN Size (Male)
AN10, -10
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Male to -10 AN ORB Male Straight Adapter
HEL part number HA-MM-10ORB-AL-BLK
Adapter Type
ORB to AN Adapter, Joiner
ORB Size (Male)
ORB10
AN Size (Male)
AN10, -10
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Male to -8 AN Male Straight Adapter
HEL part number HA-MM-10JIC-08JIC-AL-BLK
Adapter Type
AN Reducer (Male - Male), Reducing Joiner
AN Size (Male)
AN10, -10
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Male to -8 AN ORB Male Straight Adapter
HEL part number HA-MM-10JIC-08ORB-AL-BLK
Adapter Type
ORB to AN Reducer Adapter
ORB Size (Male)
ORB08
AN Size (Male)
AN10, -10
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Male to M12 x 1.5 Male Straight Adapter
HEL part number HA-MM-10-M1215-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN10, -10
Metric Size (Male)
M12 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Male to M18 x 1.5 Male Straight Adapter
HEL part number HA-MM-10-M1815-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN10, -10
Metric Size (Male)
M18 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN Male to M22 x 1.5 Male Straight Adapter
HEL part number HA-MM-10-M2215-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN10, -10
Metric Size (Male)
M22 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -10 AN ORB Male to -8 AN Male Straight Adapter
HEL part number HA-MM-10ORB-08JIC-AL-BLK
Adapter Type
ORB to AN Reducer Adapter
ORB Size (Male)
ORB10
AN Size (Male)
AN08, -08
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -12 AN Male to -12 AN Male Straight Adapter
HEL part number HA-MM-12-12-AL-BLK
Adapter Type
Joiner, Union
AN Size (Male)
AN12, -12
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -12 AN Male to -12 AN ORB Male Straight Adapter
HEL part number HA-MM-12ORB-AL-BLK
Adapter Type
ORB to AN Adapter, Joiner
ORB Size (Male)
ORB12
AN Size (Male)
AN12, -12
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -12 AN Male to M22 x 1.5 Male Straight Adapter
HEL part number HA-MM-12-M2215-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN12, -12
Metric Size (Male)
M22 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -16 AN Male to -16 AN Male Straight Adapter
HEL part number HA-MM-16-16-AL-BLK
Adapter Type
Joiner, Union
AN Size (Male)
AN16, -16
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -16 AN Male to -16 AN ORB Male Straight Adapter
HEL part number HA-MM-16ORB-AL-BLK
Adapter Type
ORB to AN Adapter, Joiner
ORB Size (Male)
ORB16
AN Size (Male)
AN16, -16
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -16 AN Male to -20 AN ORB Male Straight Adapter
HEL part number HA-MM-20JIC-16ORB-AL-BLK
Adapter Type
ORB to AN Adapter, Joiner
ORB Size (Male)
ORB20
AN Size (Male)
AN16, -16
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -20 AN Male to -20 AN ORB Male Straight Adapter
HEL part number HA-MM-20ORB-AL-BLK
Adapter Type
ORB to AN Adapter, Joiner
ORB Size (Male)
ORB20
AN Size (Male)
AN20, -20
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -3 AN Male to M12 x 1.25 Male Straight Adapter
HEL part number HA-MM-03-M12125-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN03, AN3, -3
Metric Size (Male)
M12 x 1.25
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -4 AN Male to -4 AN Male Straight Adapter
HEL part number HA-MM-04-04-AL-BLK
Adapter Type
Joiner, Union
AN Size (Male)
AN04, AN4, -4
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -4 AN Male to M12 x 1.00 Male Straight Adapter
HEL part number HA-MM-04-M121-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN04, AN4, -4
Metric Size (Male)
M12 x 1.00
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -4 AN Male to M12 x 1.25 Male Straight Adapter
HEL part number HA-MM-04-M122-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN04, AN4, -4
Metric Size (Male)
M12 x 1.25
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -4 AN Male to M12 x 1.5 Male Straight Adapter
HEL part number HA-MM-04-M125-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN04, AN4, -4
Metric Size (Male)
M12 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Female to -8 AN Male Straight Adapter
HEL part number HA-MF-08-06-AL-BLK
Adapter Type
AN Reducer (Female - Male), Reducing Joiner
AN Size (Female)
AN06, AN6, -6
AN Size (Male)
AN08, AN8, -8
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to -6 AN Male Straight Adapter
HEL part number HA-MM-06-06-AL-BLK
Adapter Type
Joiner, Union
AN Size (Male)
AN06, AN6, -6
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to -6 AN ORB Male Straight Adapter
HEL part number HA-MM-06ORB-AL-BLK
Adapter Type
ORB to AN Reducer Adapter
ORB Size (Male)
ORB06
AN Size (Male)
AN06, AN6, -6
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to -8 AN ORB Male Straight Adapter
HEL part number HA-MM-06JIC-08ORB-AL-BLK
Adapter Type
ORB to AN Reducer Adapter
ORB Size (Male)
ORB08
AN Size (Male)
AN06, AN6, -6
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to 1/4" NPT Male Straight Adapter
HEL part number HA-MM-06-14-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN06, AN6, -6
NPT Size (Male)
1/4"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to 1/8" NPT Male Straight Adapter
HEL part number HA-MM-06-18NPT-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN06, AN6, -6
NPT Size (Male)
1/8"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to M12 x 1.5 Male Straight Adapter
HEL part number HA-MM-06-M1215-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN06, AN6, -6
Metric Size (Male)
M12 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to M14 x 1.5 Male Straight Adapter
HEL part number HA-MM-06-M1415-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN06, AN6, -6
Metric Size (Male)
M14 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to M16 x 1.5 Male Straight Adapter
HEL part number HA-MM-06-M1615-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN06, AN6, -6
Metric Size (Male)
M16 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to M18 x 1.5 Male Straight Adapter
HEL part number HA-MM-06-M1815-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN06, AN6, -6
Metric Size (Male)
M18 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -6 AN Male to M22 x 1.5 Male Straight Adapter
HEL part number HA-MM-06-M2215-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN06, AN6, -6
Metric Size (Male)
M12 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Female to -10 AN Male Straight Adapter
HEL part number HA-MF-10-08-AL-BLK
Adapter Type
AN Reducer (Female - Male), Reducing Joiner
AN Size (Female)
AN08, AN8, -8
AN Size (Male)
AN10, -10
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Female to -6 AN Male Straight Adapter
HEL part number HA-MF-06-08-AL-BLK
Adapter Type
AN Reducer (Female - Male), Reducing Joiner
AN Size (Female)
AN08, AN8, -8
AN Size (Male)
AN06, AN6, -6
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to -6 AN ORB Male Straight Adapter
HEL part number HA-MM-08JIC-06ORB-AL-BLK
Adapter Type
ORB to AN Reducer Adapter
ORB Size (Male)
ORB06
AN Size (Male)
AN08, AN8, -8
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to -8 AN Male Straight Adapter
HEL part number HA-MM-08-08-AL-BLK
Adapter Type
Joiner, Union
AN Size (Male)
AN08, AN8, -8
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to -8 AN ORB Male Straight Adapter
HEL part number HA-MM-08ORB-AL-BLK
Adapter Type
ORB to AN Reducer Adapter
ORB Size (Male)
ORB08
AN Size (Male)
AN08, AN8, -8
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to 1/2" NPT Male Straight Adapter
HEL part number HA-MM-08-12-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN08, AN8, -8
NPT Size (Male)
1/2"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to 3/8" BSP Male Straight Adapter
HEL part number HA-MM-08-38-AL-BLK
Adapter Type
AN - BSP Straight Adapter
AN Size (Male)
AN08, AN8, -8
BSP Size (Male)
3/8"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to M14 x 1.5 Male Straight Adapter
HEL part number HA-MM-08-M1415-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN08, AN8, -8
Metric Size (Male)
M14 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to M16 x 1.5 Male Straight Adapter
HEL part number HA-MM-08-M1615-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN08, AN8, -8
Metric Size (Male)
M16 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to M18 x 1.5 Male Straight Adapter
HEL part number HA-MM-08-M1815-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN08, AN8, -8
Metric Size (Male)
M18 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium -8 AN Male to M22 x 1.5 Male Straight Adapter
HEL part number HA-MM-08-M2215-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN08, AN8, -8
Metric Size (Male)
M22 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN10 Male to M16 x 1.5 Male Straight Adapter
HEL part number HA-MM-AN10-M1615-AL-BLK
Adapter Type
AN - Metric Straight Adapter
AN Size (Male)
AN10, -10 AN
Metric Size (Male)
M16 x 1.5
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN20 Male to AN16 ORB Straight Adapter
HEL part number HA-MM-AN20-ORB16-AL-BLK
Adapter Type
AN - ORB Male Straight Adapter
AN Size (Male)
AN20, -20 AN
ORB Size (Male)
ORB20, -20 ORB
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN20 Male to AN20 Male Straight Adapter
HEL part number HA-MM-AN20-AN20-AL-BLK
Adapter Type
AN - AN Male Straight Adapter
AN Size (Male)
AN20, -20 AN
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN6 Male to 3/8" NPT Male Straight Adapter
HEL part number HA-MM-06-38NPT-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN06, AN6, -6
NPT Size (Male)
3/8"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN8 Male to 1/4" NPT Straight Adapter
HEL part number HA-MM-AN8-14NPT-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN08, AN8, -8 AN
NPT Size (Male)
1/4"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN8 Male to 11/16" UNF Straight Adapter
HEL part number HA-MM-AN8-1116UNF-AL-BLK
Adapter Type
AN - UNF Straight Adapter
AN Size (Male)
AN08, AN8, -8 AN
UNF Size (Male)
11/16"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN8 Male to 3/8" NPT Male Straight Adapter
HEL part number HA-MM-08-38NPT-AL-BLK
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN08, AN8, -8
NPT Size (Male)
3/8"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN8 Male to 5/8" UNF Straight Adapter
HEL part number HA-MM-AN8-58UNF-AL-BLK
Adapter Type
AN - UNF Straight Adapter
AN Size (Male)
AN08, AN8, -8 AN
UNF Size (Male)
5/8"
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium AN8 Male to AN10 ORB Straight Adapter
HEL part number HA-MM-AN8-ORB10-AL-BLK
Adapter Type
AN - ORB Male Straight Adapter
AN Size (Male)
AN08, AN8, -8 AN
ORB Size (Male)
ORB10, -10 ORB
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Aluminium M14 x 1.5 Female to -6 AN Male Straight Adapter
HEL part number HA-MF-06-M1415-AL-BLK
Adapter Type
AN (Male) - Metric (Female) Straight Adapter
AN Size (Male)
AN6, AN06, -6
Metric Size (Female)
M14 x 1.5mm
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL's AN adapters and fittings give flexibility for routing fuel, oil and water lines across motorsport and automotive applications. AN fittings are standard practice in high-performance systems that face high pressure, extreme heat and demanding conditions. These fittings and adapters are CNC-machined from aluminium, giving strong resistance to corrosion and wear in harsh automotive environments.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
Technical Specifications
Package Contents
Includes one straight metric adapter, male to female
HEL Aluminium M16 x 1.5 Female to -6 AN Male Straight Adapter
HEL part number HA-MF-06-M1615-AL-BLK
Adapter Type
AN (Male) - Metric (Female) Straight Adapter
AN Size (Male)
AN6, AN06, -6
Metric Size (Female)
M16 x 1.5mm
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL's AN adapters and fittings give flexibility for routing fuel, oil and water lines across motorsport and automotive applications. AN fittings are standard practice in high-performance systems that face high pressure, extreme heat and demanding conditions. These fittings and adapters are CNC-machined from aluminium, giving strong resistance to corrosion and wear in harsh automotive environments.
Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
Technical Specifications
Package Contents
Includes one straight metric adapter, male to female
HEL Stainless Steel -3 AN Male to -3 AN Male Straight Adapter
HEL part number H8150303C
Adapter Type
Joiner, Union
AN Size (Male)
AN03, AN3, -3
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
HEL Stainless Steel -3 AN Male to 1/8" NPT Male Straight Adapter
HEL part number H8150327C
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN03, AN3, -3
NPT Size (Male)
1/8"
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
HEL Stainless Steel -4 AN Male to 1/8" NPT Male Straight Adapter
HEL part number H8160427C
Adapter Type
AN - NPT Straight Adapter
AN Size (Male)
AN04, AN4, -4
NPT Size (Male)
1/8"
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL's adapters and fittings allow flexible routing of fuel, oil and water lines across motorsport and automotive uses. AN fittings are standard practice where fluid systems must cope with high pressure, extreme temperature and demanding conditions. They are CNC-machined from aluminium for strong resistance to corrosion and wear, supporting long service life in harsh automotive environments.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
HEL Stainless Steel -4 AN Male to 7/16" x 24 Male Straight Adapter with 0.7mm Restriction for Turbo Oil Feeds
HEL part number H8154404C-RES-07
Adapter Type
AN - UNF Male Straight Restrictor Adapter
UNF Size (Male)
7/16" x 24
AN Size (Male)
AN04, AN4, -4
Restriction Size (Internal Diameter)
0.7mm
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
Technical Specifications
Package Contents
Includes one male straight restrictor adapter, UNF to AN
HEL Stainless Steel -4 AN Male to 7/16" x 24 Male Straight Adapter with 1.0mm Restriction for Turbo Oil Feeds
HEL part number H8154404C-RES-10
Adapter Type
AN - UNF Male Straight Restrictor Adapter
UNF Size (Male)
7/16" x 24
AN Size (Male)
AN04, AN4, -4
Restriction Size (Internal Diameter)
1.0mm
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
Technical Specifications
Package Contents
Includes one male straight restrictor adapter, UNF to AN
HEL Stainless Steel -4 AN Male to 7/16" x 24 Male Straight Adapter with 1.2mm Restriction for Turbo Oil Feeds
HEL part number H8154404C-RES-12
Adapter Type
AN - UNF Male Straight Restrictor Adapter
UNF Size (Male)
7/16" x 24
AN Size (Male)
AN04, AN4, -4
Restriction Size (Internal Diameter)
1.2mm
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
Technical Specifications
Package Contents
Includes one male straight restrictor adapter, UNF to AN
HEL Stainless Steel M10 x 1.00 Male to M10 x 1.00 Male Straight Adapter
HEL part number H8153131C
Adapter Type
Joiner, Union
Metric Size (Male)
M10 x 1.00
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
HEL Stainless Steel M10 x 1.00 Male to M10 x 1.25 Male Straight Adapter
HEL part number H8153132C
Adapter Type
Metric Reducer (Male - Male), Reducing Joiner
Metric Size (Male)
M10 x 1.00
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
HEL Stainless Steel M10 x 1.25 Male to M10 x 1.25 Male Straight Adapter
HEL part number H8153232C
Adapter Type
Joiner, Union
Metric Size (Male)
M10 x 1.25
Material
Stainless Steel - Grade 303
Finish
Raw Finish
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL keeps production of its main stainless fittings, and many accessories, in-house using its own Star CNC equipment. Bleed nipples, banjo bolts and similar parts are all cut from solid stainless bar to precise tolerances, so quality stays consistent from batch to batch.
M10 x 1.00 Male to 3/8" (9.5mm) Hose Barb Adapter HEL Aluminium
HEL part number HMB-M101-38-AL-BLK
Adapter Type
Threaded Male - Barb Adapter
Barb Diameter (O.D)
9.5mm / 3/8"
Metric Size (Male)
M10 x 1.00
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This adapter converts a push-on hose barb to a metric male thread.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
This adapter converts a push-on hose barb to a metric male thread.
Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL's banjo-eye-to-barb adapters offer an easy way to convert push-fit hose to a metric thread, and come in handy where bends are sharp or room is tight. This style of adapter often suits cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit a cramped space. Its purpose is to join hose and fittings within a fluid circuit while still letting fuel, oil or water travel through the bolt: a hollow passage in the banjo eye lines up with matching holes drilled through the bolt, so fluid moves through its centre and in or out of the fitting tail.
A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.
This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.
Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
Technical Specifications
Package Contents
Includes one banjo-eye fitting that adapts to a male barb
M12 Banjo Adapter with 3/8" (9.5mm) Male Hose Barb HEL Aluminium
HEL part number HA-B-M12-38-AL-BLK
Adapter Type
Banjo Eye - Male Barb Adapter
Barb Diameter (O.D)
9.5mm / 3/8"
Banjo Eye Size (Female)
M12
Banjo Bolt Included?
No
Sealing Washer Included?
No
Material
6061-T6 Aluminium
Finish
Anodised Black
Product details
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL's banjo-eye-to-barb adapters offer an easy way to convert push-fit hose to a metric thread, and come in handy where bends are sharp or room is tight. This style of adapter often suits cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit a cramped space. Its purpose is to join hose and fittings within a fluid circuit while still letting fuel, oil or water travel through the bolt: a hollow passage in the banjo eye lines up with matching holes drilled through the bolt, so fluid moves through its centre and in or out of the fitting tail.
A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.
This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.
Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
Technical Specifications
Package Contents
Includes one banjo-eye fitting that adapts to a male barb
HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.
HEL's banjo-eye-to-barb adapters offer an easy way to convert push-fit hose to a metric thread, and come in handy where bends are sharp or room is tight. This style of adapter often suits cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit a cramped space. Its purpose is to join hose and fittings within a fluid circuit while still letting fuel, oil or water travel through the bolt: a hollow passage in the banjo eye lines up with matching holes drilled through the bolt, so fluid moves through its centre and in or out of the fitting tail.
A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.
This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.
Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.
Technical Specifications
Package Contents
Includes one banjo-eye fitting that adapts to a male barb
