AN hose and fittings: Banjo adapters

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A swivel banjo adapter is well suited to oil cooler or oil-filter sandwich-plate jobs where room is very limited.

This swivel banjo adapter comes with a bonded Dowty seal included.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• Includes one swivel banjo adapter fitted with a hose tail

• 1 x Bonded Dowty Washer/Seal

Fitting Recommendations

• Tighten to a torque of 26-30 lb/ft (35-40 Nm)

• Keep at least 10cm (4") of hose running parallel to the banjo adapter before any bend, so the swivel joint is not placed under tension that could deform its internal O-rings

• Hold the banjo bolt steady while the AN hose tail is tightened, so the circlip and internal O-rings are not put under unnecessary strain

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A swivel banjo adapter is well suited to oil cooler or oil-filter sandwich-plate jobs where room is very limited.

This swivel banjo adapter comes with a bonded Dowty seal included.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• Includes one swivel banjo adapter fitted with a hose tail

• 1 x Bonded Dowty Washer/Seal

Fitting Recommendations

• Tighten to a torque of 26-30 lb/ft (35-40 Nm)

• Keep at least 10cm (4") of hose running parallel to the banjo adapter before any bend, so the swivel joint is not placed under tension that could deform its internal O-rings

• Hold the banjo bolt steady while the AN hose tail is tightened, so the circlip and internal O-rings are not put under unnecessary strain

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A swivel banjo adapter is well suited to oil cooler or oil-filter sandwich-plate jobs where room is very limited.

This swivel banjo adapter comes with a bonded Dowty seal included.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• Includes one swivel banjo adapter fitted with a hose tail

• 1 x Bonded Dowty Washer/Seal

Fitting Recommendations

• Tighten to a torque of 26-30 lb/ft (35-40 Nm)

• Keep at least 10cm (4") of hose running parallel to the banjo adapter before any bend, so the swivel joint is not placed under tension that could deform its internal O-rings

• Hold the banjo bolt steady while the AN hose tail is tightened, so the circlip and internal O-rings are not put under unnecessary strain

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A swivel banjo adapter is well suited to oil cooler or oil-filter sandwich-plate jobs where room is very limited.

This swivel banjo adapter comes with a bonded Dowty seal included.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• Includes one swivel banjo adapter fitted with a hose tail

• 1 x Bonded Dowty Washer/Seal

Fitting Recommendations

• Tighten to a torque of 26-30 lb/ft (35-40 Nm)

• Keep at least 10cm (4") of hose running parallel to the banjo adapter before any bend, so the swivel joint is not placed under tension that could deform its internal O-rings

• Hold the banjo bolt steady while the AN hose tail is tightened, so the circlip and internal O-rings are not put under unnecessary strain

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting (Extended Length)

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

HEL's banjo bolt adapters are handy wherever room is tight or a sharp bend is required. They suit cases where a swivel-seal or forged hose end's bend radius, or its overall size, will not fit into a confined space. A banjo bolt's role is to join hose and fittings within a fluid circuit while fuel, oil or water still travels through the bolt - a hollow passage in the banjo eye lines up with matching holes in the bolt, letting fluid pass through its centre and out to, or in from, the fitting tail.

A banjo bolt is normally paired with a crush washer, or a bonded dowty seal, to keep the joint tight and leak-free. Sitting between the bolt head and whatever it fastens to, the washer or seal stops fluid escaping past the bolt.

This banjo bolt adapter is supplied without aluminium crush washers or a banjo bolt; both are available separately.

Adapters are machined from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Banjo Adapter Fitting