AN hose and fittings: Braided hose end fittings

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end

Finish

Anodised Black

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

Rubber-lined hose does not work with the swivel PTFE reusable hose ends in this range, which instead seal using a tapered olive fitting. Braided rubber hose and its fittings are sold as a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x PTFE braided AN swivel reusable hose end

HEL Performance's adapters and fittings route fuel, oil and water lines across a wide range of motorsport and automotive uses, in systems that must withstand high pressure, demanding conditions and extreme heat. Components - spanning stainless steel bleed nipples through to aluminium hose ends - are CNC-machined from premium materials, giving strong resistance to corrosion and wear.

Sizes run from AN03 (AN3, -3) to AN20 (-20), covering precise flow-rate and pressure tuning.

A 360-degree swivel joint lets the fitting rotate and align in whichever direction is needed, whether before or after it's installed. The braided hose end fittings use a tapered screw-type design so the thread does not cut into the hose as it is fitted.

PTFE- and Teflon-lined hose is not compatible with HEL's swivel reusable hose ends; HEL's PTFE hose and fittings form a separate range.

These fittings are reusable. HEL suggests using its own AN aluminium spanners together with magnetic vice jaws (aluminium or nylon) when fitting these, to prevent scratching or marking the finish.

Fittings and adapters are made from 6061-T6 aluminium and finished in a hard-wearing black anodised coating.

Technical Specifications

Package Contents

• 1 x Rubber braided AN swivel reusable hose end