AN10 Push-Lock Rubber Hose - 5/8" ID (15.9mm)
HEL part number HH-10-PO
- Type
- Push-Lock Internally Reinforced Rubber Hose
- AN Size
- AN10, -10
- Internal Diameter
- 15.9 mm (5/8 inch)
- Outside Diameter
- 23 mm (15/16 inch)
- Hose Material
- CPE Rubber
- Reinforcement
- Internal Textile Braid
- Finish
- Matt Black
- Minimum Temperature
- -40°C (-40°F)
Product details
- Maximum Temperature
- 100°C (212°F)
- Operating Pressure
- 17.23 bar (250 psi)
- Fluid Compatibility
- Coolants, Oil, Air, Fuel Systems, E10 & Lubricants
- Fitting Compatibility
- HEL Push-Lock Hose Ends & Barbed Adapters
Hose is sold per metre, supplied in a single uncut run of up to 20 metres.
Push-Lock rubber hose is a light, flexible option for use across air, coolant, fuel, oil and lubricant lines in cars and motorsport applications. Its matt black CPE rubber construction is reinforced with an internal textile braid for strength, while staying flexible enough for easy routing and installation.
This hose is intended to pair with Push-Lock barbed hose ends and matching barbed adapters, giving a push-fit connection that's secure without the extra bulk of a standard reusable braided hose end. Warming the hose end in water, or adding a touch of oil, makes it push on more easily.
Hose finisher clamps can be added where needed, and are recommended once operating temperature goes above 70°C.
- Warm the hose end in water, or apply a little oil, to make fitting easier
- Works with hose finisher clamps
- Fit a hose clamp when the working temperature will exceed 70°C
- Includes one length of Push-Lock rubber hose, HEL Performance
